As 4G technologies mature and 5G deployments accelerate, mobile network operators are becoming less reliant on 2G and 3G technologies — both for data and, more recently, for voice. This change provides an opportunity to re-allocate radio spectrum from 2/3G to 4/5G.
The phasing out of these legacy (2/3G) technologies is commonly referred to as their sunset.
Learn more3GPP is a collection of mobile telecommunications organizations that develop standards. They develop and maintain specifications for core network and service capabilities as well as radio access technologies.
Learn more5G is the fifth-generation broadband cellular network design, first introduced in 2016 and deployed in 2019. It is intended as the global successor to the 4G network. For a network to be considered 5G by the 3GPP, it must support a new radio access technology (RAT) called 5G NR ("New Radio"). 5G NR uses OFDM for modulation but offers significantly more total bandwidth than 4G (LTE). Additionally, a 5G base station (tower) may optionally support millimeter wave frequencies known as 5G FR2 ("Frequency Range 2"), which enables shorter-distance and higher-throughput data transmission.
An IoT API is the tool software developers use to gather and transfer data from one application or computer to another. APIs enable developers to programmatically interact with software components both inside and outside of their own code.
Learn moreAn APN allows a connection to the internet through a cellular network. It can also help separate traffic from other networks and defines the set of connectivity rules a device has as well as certain security measures. All cellular connected devices use either a public or private APN of some kind.
Learn moreBandwidth is defined as the maximum amount of data that can be transmitted over an internet connection in a specific range of time. In IoT bandwidth needs vary by use case.
Learn moreCat-M1 is a radio access technology that was designed specifically for IoT projects to transfer low to medium amounts of data across a wide geographic range. It is also known as LTE-M.
Learn moreIoT data plans provide access to cellular data for devices. Unlike consumer cellular plans, they’re uniquely structured for use case and business needs. Good data plans take into account the number of devices, whether or not data usage will fluctuate, fleet location, and any additional tools or features provided.
Learn moreAn IoT data pool allows businesses to buy a set amount of data for a group of devices, rather than paying per device. This is often used when some devices use a lot of data, while others use little.
IoT device certification ensures that all devices on a cellular network meet security and interoperability requirements. Different kinds of certifications are required depending on where devices will be deployed and what carriers will be accessed.
Learn moreAn edge router is a device that connects an internal network to the internet. They’re used at the edge of your network, where your private network ends and the public network begins.
Learn moreThe eSIM is a SIM card that is soldered directly to a board inside a device. The eSIM is the hardware component that allows for cellular connectivity, whereas eUICC is the software component or operating system that allows for over the air updates.
Learn moreeUICC is the software component that provides the ability to issue over-the-air (OTA) updates to SIM cards. eUICC-enabled global IoT SIM cards allow teams to build with one type of SIM card and deploy to different locations around the world. They come in multiple form factors.
Learn moreThe ICCID is a globally unique serial number consisting of 19 or 20 digits that identifies a SIM card.
Learn moreAn IMEI is a 14-digit number that serves as a distinct identifier for cellular devices.
Learn moreAn IMSI is a 15 digit number that determines a subscriber’s country of origin, mobile service network, and specific device identity.
Learn moreIPSec is a set of protocols between two points on the IP network that provide data authentication, integrity, encryption, decryption, and confidentiality.
Learn moreIoT cloud platforms are end-to-end services that provide the infrastructure for transmitting, computing, and storing data from IoT devices.
Learn moreIoT connectivity links all of the elements of an IoT ecosystem and allows devices to send and transmit data. Common IoT connectivity types include cellular, Wi-Fi, ethernet, Bluetooth, RFID, and more.
Learn moreAn IoT platform is a software as a service (SaaS) product that can oversee a fleet of connected devices. Its features vary from product to product, but may include insight into device connectivity and location as well as the ability to manage devices and view connectivity billing information.
Learn moreLatency measures how long it takes for data to travel from one point to another. Low latency means data is transferred quickly between device, network, and the intended outcome.
Learn moreLPWANs are network technologies designed for minimal power consumption and the ability to achieve long-range communications. This includes NB-IoT and Cat-M1 among others.
Learn moreLTE-M is a radio access technology that was designed specifically for IoT projects to transfer low to medium amounts of data across a wide geographic range. It is also known as Cat-M1.
M2M SIM cards — also known as IoT SIM cards — are pieces of hardware embedded or inserted into devices that enable connectivity and allow devices to send and receive data across cellular networks.
Learn moreMQTT is a lightweight messaging protocol designed for IoT. It works well for sending messages to control outputs or read sensor data.
MEC is a kind of computing that processes data closer to where it is gathered, rather than in a central data center.
Learn moreMulti-IMSI technology allows several IMSIs, or International Mobile Subscriber Identities, to be loaded on a single SIM. SIMs cycle through profiles until an available network is identified.
Learn moreAn MVNO is a connectivity provider who has negotiated agreements with several mobile network operators (MNOs) to gain access to multiple networks.
A native connection allows devices to access cellular data directly from the MNO that owns the infrastructure, rather than via a roaming connection. Native connections typically provide greater performance at a lower price than roaming profiles.
NB-IoT is a low-power, wide area network (LPWAN) technology that operates on the licensed spectrum and wass designed for IoT devices with low-bandwidth needs.
Learn moreNetwork redundancy is an overlap of cellular coverage in case an IoT device travels outside of the original coverage area or the primary network experiences a disruption.
Learn morePTCRB is a standardized framework for device certification. The program verifies compliance with 3GPP network standards.
Learn moreA PoP is a place where two or more networks or devices share one connection. PoPs are established local access points that allow for online communications and form the foundation of how we connect to the internet.
Learn moreThe RAN is responsible for the connection between devices and the core network and implements a RAT. For example, UTRAN radio access networks implement UMTS and E-UTRAN radio access networks implement LTE.
A RAT is the physical layer of a radio (cellular) connection, such as UMTS (3G) or LTE. A single device may support multiple access technologies. A RAN implements a RAT.
RSP ensures the SIM is accounted for in the databases that will determine whether or not it has the permissions to attach to a particular network or to a particular carrier. Beyond the initial SIM registration, provisioning can also include enabling the correct profile on a multi-profile SIM, or activating profiles on the SIM so they are ready to connect to the cellular network.
Learn moreIoT roaming agreements allow devices to use multiple networks to access cellular data, rather than using a singular network. Roaming connections can often provide greater coverage and redundancy than native connections.
A form factor is the standardized size and specification of SIM card. For IoT, form factors include Mini SIM (2FF), Micro SIM (3FF), Nano SIM (4FF), and Embedded SIM (MFF2).
Learn moreSMS is a method of exchanging short text messages. SMS is commonly used in IoT to send command, configure, and control messages.
Throughput is the measure of how much data can be downloaded or uploaded through the network at any particular time.
Learn moreThe first eight digits of an IMEI make up the TAC. This indicates the manufacturer and model of the particular device. All device models from one manufacturer will have the same TAC.
Learn moreA VPN creates an encrypted tunnel between data centers and their encrypted devices.
Learn more